Wiring Diagrams – OMEX and Ignition

Posted on February 3, 2018November 24, 2018 by P_A_Long

OMEX 710 Continuing with the creation of the wiring diagrams, this is my interpretation of the OMEX 710 ECU. This Engine Management System is an ultra high performance ECU system designed specifically... Read More

Number Plate Light

Posted on January 31, 2018 by P_A_Long

One of the jobs over Winter was to route the 2 core wire for the number plate light through the double skin of the GRP boot for the number plate light from the hinge mounting point. GD actually leave ... Read More

Dashboard Preparation

Posted on January 31, 2018 by P_A_Long

Dashboard... Read More

Heater

Posted on April 8, 2017November 24, 2018 by P_A_Long

The Heater was a challenge (tortuous) to install, thankfully I had the benefit of being able to validate my approach alongside those other bloggers that have gone before me. Nonetheless whilst straigh... Read More

Wiring Loom #1

Posted on April 2, 2017November 24, 2018 by P_A_Long

This has been a very time consuming task, primarily attributable to the need to record the colour of every cable, plug and socket on every loom due to the absence of a single definitive set of instruc... Read More

Radiator, Header Tank & Hoses

Posted on January 14, 2017November 24, 2018 by P_A_Long

Took the opportunity of a spare hour to start to plumb the Radiator, Header Tank and hoses in. Installation of the Header tank was relatively simple, 2x M4 Rivnuts set into the unders... Read More

Wiring & Electrics

Posted on December 22, 2016 by P_A_Long

Now this bit should be easy but I have a hunch that it is going to be quite the opposite having spent ages trying to get an accurate pinout of the front and rear loom wiring, finally reverting to deve... Read More

Gardner Douglas Mkiv Build

The trials & tribulations…..

Category: Electrical