Wiring Looms – Reverse Lockout, Hazards and IVA Fog Light Controller

Posted on 03/02/201817/11/2018 by P_A_Long

Reverse Lockout Solenoid With Reverse and 5th Gear so close to each other on the T56 / T56 Magnum Six-Speed manual transmissions, the potential for accidentally engaging reverse whil... Read More

Wiring Diagrams – OMEX and Ignition

Posted on 03/02/201824/11/2018 by P_A_Long

OMEX 710 Continuing with the creation of the wiring diagrams, this is my interpretation of the OMEX 710 ECU. This Engine Management System is an ultra high performance ECU system designed specifically... Read More

Wiring Diagrams – Looms

Posted on 03/02/201824/11/2018 by P_A_Long

The one thing that I have been disappointed with is the quality or notably the absence of any decent wiring diagrams. As a result I took it upon myself to record every plug, pinout and cable colour ... Read More

Number Plate Light

Posted on 31/01/201816/12/2018 by P_A_Long

One of the jobs over Winter was to route the 2 core wire for the number plate light through the double skin of the GRP boot for the number plate light from the hinge mounting point. GD actually leave ... Read More

Dashboard Preparation

Posted on 31/01/201816/12/2018 by P_A_Long

Dashboard... Read More

T56 Wiring Loom

Posted on 19/06/201716/12/2018 by P_A_Long

In preparation for mounting the body, I decided to take loom the 3x T56 Magnum pigtail connections (6 wires) from the transmission installed a few weeks ago. These were wrapped in split 6.5mm convolu... Read More

Heater

Posted on 08/04/201724/11/2018 by P_A_Long

The Heater was a challenge (tortuous) to install, thankfully I had the benefit of being able to validate my approach alongside those other bloggers that have gone before me. Nonetheless whilst straigh... Read More

Wiring Loom #1

Posted on 02/04/201724/11/2018 by P_A_Long

This has been a very time consuming task, primarily attributable to the need to record the colour of every cable, plug and socket on every loom due to the absence of a single definitive set of instruc... Read More

Lighting

Posted on 02/04/201716/12/2018 by P_A_Long

I took the opportunity whilst running the looms to add the front and rear lights removing the default bullet crimps with SuperSeal connectors. The P700’s look lovely despite the body being cover... Read More

T56 Magnum Wiring