Wiring & Electrics

Now this bit should be easy but I have a hunch that it is going to be quite the opposite having spent ages trying to get an accurate pinout of the front and rear loom wiring, finally reverting to developing my own my own from scratch after spreading the loom through she who must be obeyed’ kitchen for a weekend.   I also have to install the OMEX710 ECU so any tips would be gladly received, the loom appears to be reasonably straight forward with the LS3 my issue is more the most suitable location to mount the ECU. ……….

…………………expect more to come over the following months.

Leave a Reply

Your e-mail address will not be published. Required fields are marked *